欢迎访问北京尚丰祥食品机械有限公司网站!

热线:13693237787 

大型切肉机的使用与维护

来源:https://www.sfxjxbj.com/ 浏览量: 时间:2022-08-05 15:43:15

如果您要加工不一样厚薄的肉片肉丝,您可以考虑下大型切肉机的使用,只需换上相应的刀具就可以完成,一机多用。下面来讲讲该机器的使用和维护事项吧。
If you want to process sliced meat and shredded meat of different thickness, you can consider the use of large-scale meat cutting machine, which can be completed by changing the corresponding knife, and one machine can be used for multiple purposes. Let's talk about the use and maintenance of the machine.
1、检查电源电压符合规定要求,并安装漏电保护器,电源插座地线插孔应接有牢固可靠的接地线,若是三相电源,还得检查刀具的转向是否正确(与标示一致),若转向不对,须电工调整其中的两根相线。
1. Check that the power supply voltage meets the specified requirements, and install the leakage protector. The ground wire jack of the power socket should be connected with a solid and reliable ground wire. If it is a three-phase power supply, it is also necessary to check whether the direction of the tool is correct (consistent with the mark). If the direction is wrong, professional electricians must adjust two of the phase wires.
2、开机前应先检查绞肉、切肉机套桶内和刀组之间不能存在异物,否则可能发生事故,所以在开机前切记检查后方可启动电源。
2. Before starting the machine, check that there is no foreign matter in the barrel of the mincer and the meat cutter and between the knife sets, otherwise an accident may occur, so remember to check before starting the machine.
3、切肉或绞肉前须去净骨头及其它异物,宜切成40mm×40mm左右的长条状,冰冻食品须解冻。
3. Bone and other foreign matters shall be removed before meat cutting or mincing, and should be cut into 40mm × About 40mm long strip, frozen food must be thawed.
大型切肉机
4、用送料棒把肉料送入绞管,注意切勿用手或其他物件代替送料棒(护手套请勿取下)。
4. Use the feeding rod to feed the meat into the wringer. Be careful not to replace the feeding rod with hands or other objects (do not remove the safety gloves).
5、不要长时间空转机器,以防摩擦发热刀口等零件造成不要的损失。
5. Do not idle the machine for a long time to prevent unnecessary losses caused by friction, heating, knife edge and other parts.
6、用后切断电源清洗机器:切肉部分翻开切肉口盖板取出刀梳清洗;绞肉部分旋开绞肉出肉口处螺母,取出排肉器板、绞肉刀和推进器等绞肉零件清洗。固定在机器上所有与肉接触的零部件也要用清水冲洗干净,以避免细菌滋生。
6. Cut off the power supply after use to clean the machine: turn over the meat cutting part, take out the cover plate of the meat cutting mouth, and take out the knife comb for cleaning; In the meat grinding part, unscrew the nut at the meat outlet of the meat grinding, take out the meat cutter plate, meat cutter, propeller and other meat grinding parts for cleaning. All parts fixed on the machine and in contact with meat should also be washed with clean water to avoid the breeding of bacteria.
以上就是关于大型切肉机的使用与维护问题的讲解了,该机器底座有轮,灵敏移动,刀具采纳外置悬挂式规划,洗拆便利,清洁更有保证,您有采购需求就来我们网站https://www.sfxjxbj.com参与订购吧。
The above is the explanation of the use and maintenance of the large meat cutting machine. The machine base has wheels, which move sensitively. The cutter adopts the external hanging patent plan, which makes it convenient to wash and disassemble, and the cleaning is more guaranteed. If you have any purchasing needs, please come to our website https://www.sfxjxbj.com Join the order.

北京尚丰祥食品机械有限公司

备案号:京ICP备13030550号-2