欢迎访问北京尚丰祥食品机械有限公司网站!

热线:400-893-8887

净菜加工设备的使用严格要求安全事项

来源:https://www.sfxjxbj.com/ 浏览量: 时间:2022-05-11 14:44:02

作为操作净菜加工设备的人员,应该对使用安全的相关事项牢牢把握才行,这不仅关系到是否能够让设备完整顺利的运行,主要是相关人员的安全。下面来讲讲吧。
As the personnel operating the clean vegetable processing equipment, they should firmly grasp the matters related to the use safety, which is not only related to whether the equipment can operate completely and smoothly, but also the safety of relevant personnel. Let's talk about it.
净菜加工设备的机械传动部分都是危险的,尤其是机器的外露部分和突出部分,如果没有防护装置,很容易造成工人受伤。特别是在清洗机械、装配机械、检修机械、加注油的过程中,或机械突然启动、突然停止时,工人因缺乏防护装置而受伤,或卷入机器的传动部分。
The mechanical transmission part of the clean vegetable processing equipment is dangerous, especially the exposed part and protruding part of the machine. If there is no protective device, it is easy to cause workers to be injured. Especially in the process of cleaning machinery, assembling machinery, overhauling machinery and filling oil, or when the machinery suddenly starts or stops, workers are injured due to lack of protective devices or get involved in the transmission part of the machine.
因此,机器的传动部分必须有可靠的保护装置。任何操作者可能接触或涉及的活动部件,如齿轮传动、齿轮齿条传动、皮带传动和链轮传动等,都必须设置防护栅栏或防护罩。
Therefore, the transmission part of the machine must have reliable protective devices. Any moving parts that may be contacted or involved by the operator, such as gear drive, rack and pinion drive, belt drive and sprocket drive, must be equipped with protective fence or protective cover.
围栏和防护罩的位置、围栏的间距、金属网的宽度和开口的大小,必须根据操作者手和身体的活动范围来确定。
The position of the fence and protective cover, the spacing of the fence, the width of the metal mesh and the size of the opening must be determined according to the movement range of the operator's hand and body.
按要求着装。敞开的衣服必须系好扣子,袖口系紧,长发塞进帽子里,在有活动部件的机器上工作时绝对不能戴手套。机器运转时,严禁用手调整或测量工件,停止测量并将刀架移至安全位置。
Dress as required. Open clothes must be buttoned, cuffs fastened, long hair stuffed into the hat, and gloves must not be worn when working on machines with moving parts. When the machine is running, it is forbidden to adjust or measure the workpiece by hand. Stop the measurement and move the tool holder to a safe position.
工件和刀具应夹紧牢固,严禁用手触摸机器转动部件。确保操作所需的安全空间,并严格执行机器启动时的规定信号。清理靠近危险部位的滚轮、刀具等杂物时,要用夹子(如钩子、铁刷等),不要用手拉扯。
The workpiece and cutting tool shall be clamped firmly, and it is strictly prohibited to touch the rotating parts of the machine with hands. Ensure the safe space required for operation and strictly implement the specified signals when starting the machine. When cleaning rollers, knives and other sundries close to dangerous parts, use clips (such as hooks, iron brushes, etc.) instead of pulling by hand.
净菜加工设备
禁止将工具、量具、夹具和工件放在机器或齿轮箱上,以防坠落伤人。停机进行清扫、加油、检修、保养等作业时,必须锁好机器启动装置,并悬挂警示牌;当您感到危险时,请立即操作紧急停止按钮。
It is forbidden to put tools, measuring tools, fixtures and workpieces on the machine or gearbox to prevent falling and hurting people. When the machine is shut down for cleaning, refueling, overhaul and maintenance, the starting device of the machine must be locked and the warning sign must be hung; When you feel dangerous, please operate the emergency stop button immediately.
加工设备的操作位置应设置防滑、防坠的安全平台和栏杆。加工设备作业位置大于2m时,应配置安全可靠的作业平台、梯子和栏杆。加工设备的操作位置必须有良好的采光和通风。隔音机械设备应配备隔音设施,或为员工提供耳塞等防护用品。
The operating position of the processing equipment shall be provided with anti-skid and anti falling safety platforms and railings. When the operation position of processing equipment is greater than 2m, safe and reliable operation platforms, ladders and railings shall be equipped. The operating position of processing equipment must have good daylighting and ventilation. Sound insulation machinery and equipment shall be equipped with sound insulation facilities, or provide employees with ear plugs and other protective articles.
常用的动机械设备的结构有很大差异,具体的安全防护措施也不同。但一般来说,可遵循上面所讲解的一些防护措施。更多内容的了解您还可以来网站www.sfxjxbj.com进行咨询。
The structures of commonly used mechanical equipment are very different, and the specific safety protection measures are also different. However, generally speaking, some protective measures explained above can be followed. For more information, you can also visit www.sfxjxbj.com Com.

北京尚丰祥食品机械有限公司

备案号:京ICP备13030550号-2