欢迎访问北京尚丰祥食品机械有限公司网站!

热线:400-893-8887

分析切菜机主要结构与工作原理

来源:https://www.sfxjxbj.com/ 浏览量: 时间:2022-08-03 11:32:56

随着科技不断先进,越来越多的机械作业代替手工作业,而切菜机的产品多样化,让很多人对切菜机产生混淆,且切菜机型号多,如果你没有具体的购买哪一台切菜机,那你先了解下结构和原理吧,
With the continuous advancement of science and technology, more and more mechanical operations replace manual operations, and the diversification of the products of the vegetable cutting machine has confused many people with the vegetable cutting machine, and there are many types of vegetable cutting machine. If you don't have a specific vegetable cutting machine to buy, you should first understand the structure and principle,
1.主要有机架、输送带、压菜带、切片机构、调速箱或塔轮调速机构组成。
1. It is mainly composed of frame, conveyor belt, vegetable pressing belt, slicing mechanism, speed regulating box or tower wheel speed regulating mechanism.
2.离心式切片机构用于瓜薯类硬菜的切片,片厚可在一定范围内自由调节,竖刀部分可将叶类软菜或切好的片加工成不同规格的块丁、菱形等各种形状。切菜长度通过“可调偏心轮”在一定范围内任意调整。因竖刀模拟手工切菜原理,加工表面平整光滑,成型规则,被切蔬菜组织完好,保持新鲜。
2. The centrifugal slicing mechanism is used for slicing melon and potato hard vegetables. The thickness of the slices can be adjusted freely within a certain range. The vertical knife part can process leaf soft vegetables or cut slices into various shapes such as diced blocks and diamonds of different specifications. The cutting length can be adjusted arbitrarily within a certain range through the "adjustable eccentric wheel". Because the vertical knife simulates the principle of manual vegetable cutting, the processing surface is smooth and regular, and the cut vegetables are well organized and fresh.
大型切菜机
3.工作前先试切,观察所切蔬菜规格与要求规格是否一致,否则应调节切片厚度或切菜长度,符合要求后进行正常工作。
3. Try cutting before working, and observe whether the specification of the cut vegetables is consistent with the required specification. Otherwise, adjust the slice thickness or the length of the cut vegetables, and work normally after meeting the requirements.
4.大型切菜机的安装竖刀:先转动可调偏心轮,使刀架行至下死点后,再使刀架向上抬起1-2毫米,使竖刀与输送带接触后,紧固螺母把竖刀紧固在刀架上。说明:刀架抬起高度可根据所切蔬菜自行掌握。如果刀架抬起高度小,蔬菜有可能连刀;如果刀架抬起高度过大,有可能切坏输送带。
4. Installation of vertical knife of large vegetable cutting machine: first turn the adjustable eccentric to make the knife rest travel to the bottom dead center, and then lift the knife rest up by 1-2 mm. After the vertical knife contacts the conveyor belt, fasten the nut to fasten the vertical knife on the knife rest. Note: the lifting height of the knife rest can be controlled according to the vegetables cut. If the lifting height of the knife rest is small, the vegetables may be even knives; If the lifting height of the knife rest is too high, the conveyor belt may be damaged.
5.切菜机调整:转动可调偏心轮,松开连杆紧固螺钉,切细丝可移动支点,由外向里(此时开口应朝上),切粗丝时可移动支点,由里往外(此时开口应朝下),调好后紧固调整螺钉。
5. Adjustment of the vegetable cutting machine: turn the adjustable eccentric wheel, loosen the fastening screw of the connecting rod, and the movable fulcrum of the thin wire can be cut from the outside to the inside (at this time, the opening should face up). When cutting the thick wire, the movable fulcrum can be moved from the inside to the outside (at this time, the opening should face down). Tighten the adjusting screw after adjustment.
切菜机的结构原理可以在功率转速等等方面详细了解,准确购买适合自己的切菜机产品。更多相关事项就来关注我们网站https://www.sfxjxbj.com吧。
The structure and principle of the vegetable cutting machine can be understood in detail in terms of power, speed and so on, and you can accurately buy your own vegetable cutting machine products. Follow our website for more related matters https://www.sfxjxbj.com OK.

北京尚丰祥食品机械有限公司

备案号:京ICP备13030550号-2